Protecting Steel Structures with the Right Industrial Coating
Sample article. Will be updated by the website admin.
Steel structures in industrial and coastal environments are constantly exposed to moisture, chemicals and salt. A well-chosen coating system is one of the most cost-effective ways to extend their service life.
Surface preparation is everything
- Remove rust, mill scale, oil and dust before painting.
- Check the surface profile and cleanliness required by the coating supplier.
- Paint only when the surface is dry and the weather conditions are within the recommended range.
Building a coating system
- Primer: provides adhesion and corrosion protection.
- Intermediate coat: adds film thickness and barrier protection.
- Topcoat: resists weather, UV and chemicals.
Application and inspection
Use the thinner and mixing ratio recommended by the paint manufacturer, respect recoating times, and measure dry film thickness after each coat. Regular inspection and touch-up keep small defects from becoming major repairs.
Recommended Products
Cat Besi Jotun
Used to protect and coat steel and metal surfaces against corrosion and environmental exposure.
Thinner Jotun
Used to dilute compatible coatings and facilitate proper application and finishing.
Carbon Steel Plate
Used for fabrication, structural construction, tanks, equipment, and industrial components.
Besi Siku
Used for structural frames, supports, brackets, and general fabrication applications.
Have Similar Industrial Requirements?
Our engineering team is ready to assist your project from fabrication to regular maintenance.